RD Group is a leading jaw crusher machine manufacturers, suppliers, and exporters in Nashik, India offering robust crushing solutions for mining, quarrying, and aggregate industries. The jaw crushers are suitable for primary crushing of hard and abrasive materials like granite, basalt, ores, etc. and provide reliable performance.
RD Group manufacture single toggle jaw crushers for primary crushing in the mining, quarrying and aggregate processing industries. These machines are designed with a large crushing chamber and an adjustable Closed Side Setting (CSS) to ensure that the material is crushed efficiently while maintaining a consistent production rate. They also have an optimized nip angle for efficient material crushing and consistent production. The range size increases from 610 × 305 mm to 1270 × 1016 mm, feed sizes to 250–915 mm and a motor power of 37–160 kW.
Jaw Crusher Machine is one of the most reliable and efficient machines used for primary size reduction in the mining and construction industries․ This machine is capable of handling tough materials with ease․ It is used to break down large‚ hard rocks to a smaller size so they can be processed․
While working in both mining and construction industries‚ a jaw crusher will usually produce the highest productivity‚ output and efficiency․ It is a strong‚ heavy duty machine with a long service life that can be used for various industrial applications․
| Technical Specification JAW CRUSHER | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MODELS | FEED OPENING (L x W) (mm) | MAX. FEED SIZE (mm) | MOTOR (hp/kW) | RPM | WEIGHT (TON) | AVERAGE CAPACITY (Tons/hr.) AS PER CSS RANGE (mm) | ||||||||||
| 25 | 38 | 50 | 63 | 75 | 90 | 100 | 125 | 150 | 175 | 200 | ||||||
| RDJC 2412 | 610 x 305 | 250 | 50 / 37 | 310 | 6 | 28 | 33 | 43 | 48 | 55 | 62 | |||||
| RDJC 2415 | 610 x 381 | 300 | 50 / 37 | 310 | 6.6 | 40 | 45 | 53 | 60 | 70 | ||||||
| RDJC 3015 | 762 x 381 | 300 | 50 / 37 | 285 | 7.4 | 50 | 63 | 70 | 80 | 88 | ||||||
| RDJC 3024 | 762 x 508 | 400 | 60 / 45 | 285 | 10 | 68 | 72 | 80 | 98 | |||||||
| RDJC 3624 | 914 x 610 | 500 | 75 / 55 | 280 | 16.6 | 80 | 90 | 125 | 140 | 175 | 200 | |||||
| RDJC 3628 | 914 x 710 | 600 | 100 / 75 | 280 | 17.2 | 115 | 140 | 165 | 190 | 215 | 240 | |||||
| RDJC 4232 | 1067 x 813 | 650 | 150 / 110 | 265 | 21.4 | 125 | 150 | 175 | 200 | 250 | 275 | |||||
| RDJC 4432 | 1118 x 813 | 650 | 150 / 110 | 280 | 22.5 | 165 | 190 | 230 | 280 | 330 | ||||||
| RDJC 4236 | 1067 x 914 | 750 | 180 / 132 | 260 | 24 | 175 | 200 | 250 | 300 | 350 | ||||||
| RDJC 4436 | 1118 x 914 | 750 | 180 / 132 | 260 | 24.6 | 200 | 225 | 275 | 330 | 375 | ||||||
| RDJC 5040 | 1270 x 1016 | 915 | 215 / 160 | 260 | 35 | 300 | 340 | 375 | 455 | |||||||
A jaw crusher is a heavy duty machine that works to crush large rocks, ores among other materials into smaller sizes so that some operations can be done on them. Its operating principle is a crushing chamber in the sense that material is squeezed between fixed and moving jaw. As the swing jaw draws near the fixed jaw material is size reduced until when it is reduced to a size that fits through the bottom opening. The jaw crushers have this simple but powerful mechanism which enables the industry to use these jaw crushers in mining, construction, demolition, and recycling industries.
A jaw crusher crushes rocks against two plates by squeezing them, one stationary and the other moving. The motor is connected to the eccentric shaft in RD Group jaw crushers, which causes the movement of the movable jaw to be a reciprocating type. When the movable jaw moves towards the fixed jaw, granite, basalt and other hard rocks are crushed into smaller pieces. The material crushed then passes down the crushing chamber and out of the crushing chamber through the bottom opening. Closed Side Setting (CSS) refers to the approximate output size, and the production capacity is affected by factors such as feed size, material hardness, and operating conditions. RD Group jaw crushers are suited for primary crushing in mining, quarrying and aggregate plants, and are used to reliably size the material prior to secondary crushing and screening.
RD Jaw Crushers are versatile, multi-industry machines designed to perform efficiently across a wide range of crushing applications.
RD Jaw Crushers are designed for heavy duty operations and are suitable for crushing hard and abrasive materials like:
Ensuring reliable performance in demanding mining environments.
Essential for producing high-quality construction materials, including:
Supporting infrastructure development with consistent and durable output.
Efficiently process and reduce construction waste materials such as:
Enabling sustainable reuse and reducing environmental impact.
Suitable for small to medium-scale material processing in manufacturing industries, including:
Delivering precise size reduction for various industrial applications.
RD Jaw Crushers – Versatility That Powers Every Industry.
RD Group jaw crushers can process hard rocks such as granite, basalt, and ores. The maximum feed size varies by model, ranging from 250 mm to 915 mm.
A jaw crusher is generally used for primary crushing to break large rocks into smaller pieces, while a cone crusher is commonly used for secondary or tertiary crushing to produce finer material.
Jaw crushers are primarily used for crushing large rocks and minerals in mining, quarrying, and aggregate production before further processing.
RD Group jaw crushers offer average capacities of up to 455 tons per hour, depending on the model, material properties, feed size, and CSS setting.
RD Group jaw crushers accommodate maximum feed sizes ranging from 250 mm to 915 mm, depending on the selected model.
RD Group jaw crusher models offer motor power options from 37 kW to 160 kW, depending on the machine size, capacity, and application requirements.